Colorado Ski Furniture | Ski Tec Adirondack Chair

Super Mogul Mixed Breed

Ski-Tec — Fri, 06 Jan 2012 17:24:22 +0000

Recently completed work of art featuring 2 Pair of K2 Super Stinx, 1 pair of old school Atomic super mogul and one pair of Atomic Team Mogul. Some nice folks from Pittsburgh brought their skis to fashion a custom chair. This Bad boy has a long journey home!!

Ski Wine Rack by SKI-TEC

Ski-Tec — Thu, 29 Dec 2011 15:50:07 +0000

Introducing the Fischer XTR Ski Wine Rack. Made right here in Colorado out of up-cycled skis.

Just in Time for Xmas..last one for this year.

Ski-Tec — Fri, 23 Dec 2011 17:36:19 +0000

Recently completed Ski-tec Adirondack Chair made up of K2 Omnis and K2 Four-Rs. Just in Time for the Holidays. Last one available before X-MAS.

Snow Day

Ski-Tec — Thu, 22 Dec 2011 16:29:59 +0000

Looking like its gonna be a white Xmas…

In The Elements

Ski-Tec — Wed, 26 Oct 2011 15:48:45 +0000

The first snow in Denver always rolls in right around Halloween. Don’t they just look right at home covered in snow though…???

The Mini

Ski-Tec — Sun, 02 Oct 2011 17:18:56 +0000

The Ski-Tec mini for the pint sized collector. Always wear a helmet… even if you’re just sittin.

Ski Bird Feeder by Ski-Tec: DIY

Ski-Tec — Thu, 01 Sep 2011 17:51:18 +0000

The ski bird feeder hanger is a new item that took some serious ingenuity to create…..and I’m willing to share my knowledge. This dude can be created and installed in about 10 minutes….from me to you….enjoy!

Grab a pair of old skis. Hold one ski in each hand. The ski in your left hand….put it down… you don’t need it. You should still have a ski in your right hand. If you don’t..start this process over until you have one remaining ski in your right hand.
Next….chop that Ski in half. I used a kids sized Blizzard. But any ski will work….
Drill 4 few holes in the rear of the ski. (2 holes would probably work but I have large cats that like to ‘walk the plank’ in order to attempt to catch the birds.)
Drill one hole in the tip of the ski to attach the Bird Feeder. I used and Eye bolt to hang the bird feeder.
Then attach the actual ski wherever you like using the 4 holes you drilled. (1″ 1/4 wood or deck screws will work perfect)
Sit back on the patio and enjoy. Your neighbors will be jealous. Luckily you still have one spare ski so you can make them one as well.

How to clean the tops of Skis

Ski-Tec — Tue, 16 Aug 2011 14:36:19 +0000

This chair has been sitting in my outdoor showroom (my patio) for about 6 months. It has endured snow, rain, hail and countless hours in the sun. The skis top-sheet started becoming oxidized, similar to an old car, showing water drops and appearing to fade.. I searched everywhere on-line for a solution but all you get is how to clean and wax the bottoms…for obvious reasons. So I decided to experiment myself and found that using a little rubbing compound then some simple car spray-on wipe-off wax brings them back to looking like new. This is the first time I have had this problem….it really depends on the type of ski and the material/finish they used for the top-sheet. The K2 FOURr’s did not have a glossy type finish when new. I would be hesitant to apply this method to skis or snowboards with a shiny/glossy finish (test in a small area first..as they say). But if we’re talking old skis on a ski chair…its a worth a shot. From me to you……

K2 Mixed Breed Ski Chair

Ski-Tec — Wed, 10 Aug 2011 18:58:23 +0000

The K2 Adirondack Chair by Ski-Tec featuring extreme comfort, sport styling and dripping with green K2 Four Rs and K2 Omni Sport recycled Colorado snow skis.

Red-n-Yella Colorado Ski Adirondack Chair

Ski-Tec — Thu, 14 Jul 2011 13:02:50 +0000

The Fischer and Volkl Vertigo mixed breed Adirondack chair by Ski-Tec.com. ‘Red-n-Yella’… Re-designing the world one patio at a time!